This ready-to-use adhesive sealant skins over in 4 – 10 minutes, and has a tensile strength of 150 – 180 psi after fully cured. The fast tack and early strength combine to hold the assembly together as the unit moves from station to station. Novagard fast cure products outperform slower materials in multi-step assembly applications.

The post 400-196 Fast Cure Oxime-cure Silicone Paste appeared first on Novagard Store.

This ready-to-use adhesive sealant skins over in 4 – 7 minutes, and has a tensile strength of 150 – 200 psi after fully cured. The fast tack and early strength combine to hold the assembly together as the unit moves from station to station. Novagard fast cure products outperform slower materials in multi-step assembly applications.

The post 400-202 Fast Cure Oxime-cure Silicone Paste appeared first on Novagard Store.

This ready-to-use adhesive sealant skins over in <15 minutes, and has a tensile strength of 200 – 300 psi after fully cured. Specially formulated to retain its physical properties even during service in extreme environmental conditions, 400-590 is a smooth, black paste that is ideal for applications that require superior bond strength and moisture resistant sealing in automotive and industrial arenas.

The post 400-590 Blow Out Resistant Oxime-cure Silicone Paste appeared first on Novagard Store.

This ready-to-use adhesive sealant skins over in 3 – 10 minutes, and has a tensile strength of 300 – 400 psi after fully cured. 400-110 is well suited to sealing and bonding applications within many arenas.

The post 400-110 High Strength Oxime-cure Silicone Paste appeared first on Novagard Store.

This ready-to-use adhesive sealant skins over in 3 – 10 minutes, and has a tensile strength of 300 – 400 psi after fully cured. 400-118 is well suited to sealing and bonding applications within many arenas.

The post 400-118 High Strength Oxime-cure Silicone Paste appeared first on Novagard Store.

This ready-to-use adhesive sealant skins over in 5 – 15 minutes, and has a tensile strength of minimum 200 psi after fully cured. 400-155 is well suited to sealing and bonding applications within many arenas.

The post 400-155 High Strength Oxime-cure Silicone Paste appeared first on Novagard Store.

This ready-to-use adhesive sealant skins over in 30 – 40 minutes, and bonds to most common substrates without the use of a primer.

The post 400-900 Low Adhesion Oxime-cure Silicone Paste appeared first on Novagard Store.

This ready-to-use adhesive sealant skins over in 30 – 40 minutes, and bonds to most common substrates without the use of a primer.

The post 400-950 Low Adhesion Oxime-cure Silicone Paste appeared first on Novagard Store.

This ready-to-use adhesive sealant skins over in 4 – 7 minutes, and has a tensile strength of >150 psi after fully cured. The fast tack and early strength combine to hold the assembly together as the unit moves from station to station. Novagard fast cure products outperform slower materials in multi-step assembly applications.

The post 400-195 Fast Cure Oxime-cure Silicone Paste appeared first on Novagard Store.

• Utilizes a moisture cure system at room temperature to result in a tough, resilient, silicone rubber
• Retain enough thixotropy to prevent leakage during the cure cycle
• Superior UV resistance

200-251 has a viscosity of 8,000 – 12,000 cPs and skins over in zero – 20 minutes. A conformal coating, 200-251 is preferable to paste-consistency products where flow coating is the chosen application method and when flow into small crevices and hard-to-reach places is desired.

The post 200-251 Oxime-cure Flowable Silicone appeared first on Novagard Store.